Framo Morat

Custom design and manufacture of metal and plastic drive systems and individual gears, spanning concept design, prototyping, tool design and series production.

Wheel hub gearboxes and integrated wheel hub drives for AGVs and mobile robots; standard NG and RNA series rated 250-750 kg maximum load capacity per wheel, with RS485/CAN bus communication.

Slip-on geared motors combining motor, worm-spur gearbox and limit switches; models MR6, MS12, MR30, AG160 output 60-1,600 Nm torque, ~100 standard configurations.

Planetary gearboxes with ground gearing; high-end models rated up to 1,266 Nm (GFE line to 1,562 Nm) output torque, backlash from <=1 to <=10 arcmin depending on model.

Push/pull and lifting linear actuators; LinearChain systems deliver up to 35 kN push force with strokes exceeding 10 m; Mini spindle actuators up to 26 kN lifting force; IP65 rated.

Precision metal gear components including spur gears, pinion shafts, rotor shafts, ring gears and sprockets; module 0.5-6 mm, diameter up to 300 mm, face width up to 320 mm, in-house heat treatment.

Worm gear sets in standard center distances 17-80 mm (ratios 2.25:1 to 100:1); custom designs to 210 mm center distance support dynamic loads to 9,000 Nm; over 1.5 million units produced annually.

speeroX high-transmission gearing, an alternative to worm, bevel and multi-stage planetary gear sets for compact, quiet drives; used in surgical robotics right-angle drives and geared motors.